Technical Service
Bulletins

The Technical Service Bulletins serve to assist those in the window and building community to make better technical decisions using Cardinal glass products.

By viewing or downloading these Technical Service Bulletins, you show that you have read and understand the disclaimer related to the respective company.

Note: The Technical Service Bulletins are in PDF format, and require Adobe Reader to view. Please see the warranties and terms & conditions of each respective company at the bottom of the page.

Cardinal IG Company

Disclaimer: Cardinal IG Company

The attached Technical Service Bulletins for Cardinal IG Company are provided as a service to our Customers. The Bulletins provide technical information on glass products sold by Cardinal IG Company.
This Technical Service Bulletin is issued by Cardinal IG Company. Any customer of Cardinal or other user of this Technical Service Bulletin (collectively, the “User”) is solely responsible for determining whether a product purchased from Cardinal is suitable for the User’s needs or applications. Although Cardinal may be asked to provide information about its product(s) in a proposed application or make information or its opinions available from time to time, Cardinal will not, by responding to requests for or otherwise providing opinions or information, including but not limited to providing information contained in Technical Service Bulletins, assume any responsibility for the design or suitability of the User’s product(s) in the proposed application, the User’s methods, processes or products, to supplement any opinions or information provided or to make further information available. The User will at all times be solely responsible for determining the suitability of Cardinal’s or Cardinal’s affiliates’ recommendations, advice, processes, services, and products for use in the User’s own applications and for identifying and performing to the User’s satisfaction all quality control tests, analyses, forecasts, and other tests and examinations necessary to assure that the User’s products and services will be safe, acceptable and suitable for use under end-use conditions.”

IG01 | (11/21)

Insulating Glass Condensation

IG02 | (08/22)

Argon Gas Filling

IG03 | (12/23)

Glass Windload Tables

IG04 | (08/22)

Use of Retrofit Films

IG05 | (--/--)

Document moved to TSB CG09

IG06 | (07/20)

Heat-Strengthened Glass

IG07 | (08/22)

Thermal Breakage Prediction

IG08 | (08/20)

Use of Internal Grilles

IG09 | (08/20)

Glass Acoustical Information

IG10 | (08/22)

Fogging Potential in Insulating Glass Units

IG11 | (--/--)

Document moved to TSB CG10

IG12 | (08/20 ENG, 08/23 ESP)

Glass Cleaning Recommendations

IG13 | (08/20)

Capillary Tubes and Breather Tubes

IG14 | (08/22)

Vinyl Siding Distortion

IG15 | (08/22)

Compatibility with Insulating Glass Sealants

IG16 | (08/22 ENG, 08/23 ESP)

Preserve® Film

IG17 | (08/22)

Use of Bumpers on Exposed Internal Grilles

IG18 | (12/20)

Distortion in Glass Products

IG19 | (12/20)

True Divided Lites (TDL) and Authentic Divided Lites vs. Superior Divided Lites (SDL)

IG20 | (12/20)

Insulating Glass Durability

IG21 | (12/20)

XL Edge® Spacer and Endur™ IG

IG22 | (08/22)

Triple-Pane Guidelines

IG23 | (12/23)

Size Limit Guidelines

IG24 | (12/20)

Insulating Glass Breakage

Cardinal CG Company

Disclaimer: Cardinal CG Company

The attached Technical Service Bulletins for Cardinal CG Company are provided as a service to our Customers. The Bulletins provide technical information on glass products sold by Cardinal CG Company.

This Technical Service Bulletin is issued by Cardinal CG Company. Any customer of Cardinal or other user of this Technical Service Bulletin (collectively, the “User”) is solely responsible for determining whether a product purchased from Cardinal is suitable for the User’s needs or applications. Although Cardinal may be asked to provide information about its product(s) in a proposed application or make information or its opinions available from time to time, Cardinal will not, by responding to requests for or otherwise providing opinions or information, including but not limited to providing information contained in Technical Service Bulletins, assume any responsibility for the design or suitability of the User’s product(s) in the proposed application, the User’s methods, processes or products, to supplement any opinions or information provided or to make further information available. The User will at all times be solely responsible for determining the suitability of Cardinal’s or Cardinal’s affiliates’ recommendations, advice, processes, services, and products for use in the User’s own applications and for identifying and performing to the User’s satisfaction all quality control tests, analyses, forecasts, and other tests and examinations necessary to assure that the User’s products and services will be safe, acceptable and suitable for use under end-use conditions.

CG01 | (11/23)

Edge Deletion of Sputtered Low-E Coatings

CG02 | (11/23)

Sealant Compatibility with Sputtered LoĒ™ Coatings

CG03 | (11/23)

IG Unit Frost Points, Internal Condensation and LoĒ™ Corrosion Potential

CG04 | (11/23)

Neat+™ Coated Glass

CG05 | (11/23)

Handling and Storage of Cardinal’s LoĒ™ Coated Glass Products

CG06 | (11/23)

Cardinal LoĒ-i89™ Coating

CG07 | (11/23)

Haze in Glass Products

CG08 | (07/22)

Electromagnetic Shielding Effectiveness of Low-E Coatings

CG09 | (11/23)

Insulating Glass Unit (IGU) Performance Data

CG10 | (11/23)

Fading

CG11 | (11/23)

Suggested LoĒ Configurations

Cardinal FG Company

Disclaimer: Cardinal FG Company

The attached Technical Service Bulletins for Cardinal FG Company are provided as a service to our Customers. The Bulletins provide technical information on glass products sold by Cardinal FG Company.

This Technical Service Bulletin is issued by Cardinal FG Company. Any customer of Cardinal or other user of this Technical Service Bulletin (collectively, the “User”) is solely responsible for determining whether a product purchased from Cardinal is suitable for the User’s needs or applications. Although Cardinal may be asked to provide information about its product(s) in a proposed application or make information or its opinions available from time to time, Cardinal will not, by responding to requests for or otherwise providing opinions or information, including but not limited to providing information contained in Technical Service Bulletins, assume any responsibility for the design or suitability of the User’s product(s) in the proposed application, the User’s methods, processes or products, to supplement any opinions or information provided or to make further information available. The User will at all times be solely responsible for determining the suitability of Cardinal’s or Cardinal’s affiliates’ recommendations, advice, processes, services, and products for use in the User’s own applications and for identifying and performing to the User’s satisfaction all quality control tests, analyses, forecasts, and other tests and examinations necessary to assure that the User’s products and services will be safe, acceptable and suitable for use under end-use conditions.

FG01 | (01/16)

Strain Pattern or Quench Pattern Characteristics

FG02 | (01/16)

GANA Bulletin “Heat-Treated Glass Surfaces Are Different”

FG03 | (01/16)

Safety Glazing

FG04 | (11/23)

Pyrolytic Coatings Hand Cleaning Recommendations

FG05 | (11/23)

Machine Washing Pyrolytic Low Emissivity Coatings and Washer Maintenance

FG06 | (11/23)

4th Surface Comfort Select 73P and Energy Select 73P Special Considerations

Cardinal LG Company

Disclaimer: Cardinal LG Company

The attached Technical Service Bulletins for Cardinal LG Company are provided as a service to our Customers. The Bulletins provide technical information on glass products sold by Cardinal LG Company.

This Technical Service Bulletin is issued by Cardinal LG Company. Any customer of Cardinal or other user of this Technical Service Bulletin (collectively, the “User”) is solely responsible for determining whether a product purchased from Cardinal is suitable for the User’s needs or applications. Although Cardinal may be asked to provide information about its product(s) in a proposed application or make information or its opinions available from time to time, Cardinal will not, by responding to requests for or otherwise providing opinions or information, including but not limited to providing information contained in Technical Service Bulletins, assume any responsibility for the design or suitability of the User’s product(s) in the proposed application, the User’s methods, processes or products, to supplement any opinions or information provided or to make further information available. The User will at all times be solely responsible for determining the suitability of Cardinal’s or Cardinal’s affiliates’ recommendations, advice, processes, services, and products for use in the User’s own applications and for identifying and performing to the User’s satisfaction all quality control tests, analyses, forecasts, and other tests and examinations necessary to assure that the User’s products and services will be safe, acceptable and suitable for use under end-use conditions.

LG01 | (01/16)

Miami-Dade County NOA’s, and “Hurricane Impact” Certification

LG02 | (01/16)

Optical Distortion in Sea-Storm® Laminated Glass Fabricated with ..

LG03 | (01/16)

Optical Distortion in Laminating Glass Fabricated with Heat Strengthened …

LG04 | (01/20)

Marking and Labeling of Laminated Glass

LG05 | (01/20)

Glazing System Compatibility with Laminated Glass

LG06 | (09/20)

Laminated Glass with Low-E Coatings

Your selection in window glass really makes a difference. So ask about glass choices when shopping for windows, and know that by demanding Cardinal’s glass products in your design, you’ll be making a wise investment for your home.